Asterisk - The Open Source Telephony Project GIT-master-d5a0626
|
; ; Asterisk Built-in mini-HTTP server ; ; ; Note about Asterisk documentation: ; If Asterisk was installed from a tarball, then the HTML documentation should ; be installed in the static-http/docs directory which is ; (/var/lib/asterisk/static-http/docs) on linux by default. If the Asterisk ; HTTP server is enabled in this file by setting the "enabled", "bindaddr", ; and "bindport" options, then you should be able to view the documentation ; remotely by browsing to: ; http://<server_ip>:<bindport>/static/docs/index.html ; [general] ; ; The name of the server, advertised in both the Server field in HTTP ; response message headers, as well as the <address /> element in certain HTTP ; response message bodies. If not furnished here, "Asterisk/{version}" will be ; used as a default value for the Server header field and the <address /> ; element. Setting this property to a blank value will result in the omission ; of the Server header field from HTTP response message headers and the ; <address /> element from HTTP response message bodies. ; servername=Asterisk ; ; Whether HTTP/HTTPS interface is enabled or not. Default is no. ; This also affects manager/rawman/mxml access (see manager.conf) ; ;enabled=yes ; ; Address to bind to, both for HTTP and HTTPS. You MUST specify ; a bindaddr in order for the HTTP server to run. There is no ; default value. ; bindaddr=127.0.0.1 ; ; Port to bind to for HTTP sessions (default is 8088) ; ;bindport=8088 ; ; Prefix allows you to specify a prefix for all requests ; to the server. The default is blank. If uncommented ; all requests must begin with /asterisk ; ;prefix=asterisk ; ; sessionlimit specifies the maximum number of httpsessions that will be ; allowed to exist at any given time. (default: 100) ; ;sessionlimit=100 ; ; session_inactivity specifies the number of milliseconds to wait for ; more data over the HTTP connection before closing it. ; ; Default: 30000 ;session_inactivity=30000 ; ; session_keep_alive specifies the number of milliseconds to wait for ; the next HTTP request over a persistent connection. ; ; Set to 0 to disable persistent HTTP connections. ; Default: 15000 ;session_keep_alive=15000 ; ; Whether Asterisk should serve static content from static-http ; Default is no. ; ;enable_static=yes ; ; Whether Asterisk should serve a status page showing the running ; configuration of this built-in HTTP server. ; Default is yes. ; ;enable_status=no ; ; Redirect one URI to another. This is how you would set a ; default page. ; Syntax: redirect=<from here> <to there> ; For example, if you are using the Asterisk-gui, ; it is convenient to enable the following redirect: ; ;redirect = / /static/config/index.html ; ; HTTPS support. In addition to enabled=yes, you need to ; explicitly enable tls, define the port to use, ; and have a certificate somewhere. ;tlsenable=yes ; enable tls - default no. ;tlsbindaddr=0.0.0.0:8089 ; address and port to bind to - default is bindaddr and port 8089. ; ;tlscertfile=</path/to/certificate.pem> ; path to the certificate file (*.pem) only. ;tlsprivatekey=</path/to/private.pem> ; path to private key file (*.pem) only. ; If no path is given for tlscertfile or tlsprivatekey, default is to look in current ; directory. If no tlsprivatekey is given, default is to search tlscertfile for private key. ; ; To produce a certificate you can e.g. use openssl. This places both the cert and ; private in same .pem file. ; openssl req -new -x509 -days 365 -nodes -out /tmp/foo.pem -keyout /tmp/foo.pem ; ; tlscipher= ; The list of allowed ciphers ; ; if none are specified the following cipher ; ; list will be used instead: ; ECDHE-RSA-AES128-GCM-SHA256:ECDHE-ECDSA-AES128-GCM-SHA256:ECDHE-RSA-AES256-GCM-SHA384: ; ECDHE-ECDSA-AES256-GCM-SHA384:DHE-RSA-AES128-GCM-SHA256:DHE-DSS-AES128-GCM-SHA256: ; kEDH+AESGCM:ECDHE-RSA-AES128-SHA256:ECDHE-ECDSA-AES128-SHA256:ECDHE-RSA-AES128-SHA: ; ECDHE-ECDSA-AES128-SHA:ECDHE-RSA-AES256-SHA384:ECDHE-ECDSA-AES256-SHA384: ; ECDHE-RSA-AES256-SHA:ECDHE-ECDSA-AES256-SHA:DHE-RSA-AES128-SHA256:DHE-RSA-AES128-SHA: ; DHE-DSS-AES128-SHA256:DHE-RSA-AES256-SHA256:DHE-DSS-AES256-SHA:DHE-RSA-AES256-SHA: ; AES128-GCM-SHA256:AES256-GCM-SHA384:AES128-SHA256:AES256-SHA256:AES128-SHA:AES256-SHA: ; AES:CAMELLIA:DES-CBC3-SHA:!aNULL:!eNULL:!EXPORT:!DES:!RC4:!MD5:!PSK:!aECDH: ; !EDH-DSS-DES-CBC3-SHA:!EDH-RSA-DES-CBC3-SHA:!KRB5-DES-CBC3-SHA ; ; tlsdisablev1=yes ; Disable TLSv1 support - if not set this defaults to "yes" ; tlsdisablev11=yes ; Disable TLSv1.1 support - if not set this defaults to "no" ; tlsdisablev12=yes ; Disable TLSv1.2 support - if not set this defaults to "no" ; ; tlsservercipherorder=yes ; Use the server preference order instead of the client order ; ; Defaults to "yes" ; ; The post_mappings section maps URLs to real paths on the filesystem. If a ; POST is done from within an authenticated manager session to one of the ; configured POST mappings, then any files in the POST will be placed in the ; configured directory. ; ;[post_mappings] ; ; NOTE: You need a valid HTTP AMI mansession_id cookie with the manager ; config permission to POST files. ; ; In this example, if the prefix option is set to "asterisk", then using the ; POST URL: /asterisk/uploads will put files in /var/lib/asterisk/uploads/. ;uploads = /var/lib/asterisk/uploads/ ;