#include <sig_pri.h>
Definition at line 444 of file sig_pri.h.
◆ append_msn_to_user_tag
unsigned int append_msn_to_user_tag |
◆ cc_params
CC config parameters for each new call.
Definition at line 446 of file sig_pri.h.
◆ colp_send
Send connected line signaling to peer option.
Definition at line 514 of file sig_pri.h.
◆ congestion_devstate
Congestion device state of the span.
AST_DEVICE_NOT_INUSE - Span does not have all B channels in use. AST_DEVICE_BUSY - All B channels are in use. AST_DEVICE_UNAVAILABLE - Span is in alarm.
- Note
- Device name:
DAHDI/I<span>/congestion.
Definition at line 627 of file sig_pri.h.
◆ cpndialplan
Connected party dialing plan
Definition at line 506 of file sig_pri.h.
◆ dchan_logical_span
Logical offset the DCHAN sits in
Definition at line 456 of file sig_pri.h.
◆ dchanavail
Whether each channel is available
Definition at line 590 of file sig_pri.h.
◆ dchans
◆ debug
set to true if to dump PRI event info
Definition at line 591 of file sig_pri.h.
◆ dialplan
◆ discardremoteholdretrieval
int discardremoteholdretrieval |
shall remote hold or remote retrieval notifications be discarded?
Definition at line 450 of file sig_pri.h.
◆ facilityenable
Enable facility IEs
Definition at line 451 of file sig_pri.h.
◆ fds
FD's for d-channels
Definition at line 457 of file sig_pri.h.
◆ force_restart_unavailable_chans
unsigned int force_restart_unavailable_chans |
TRUE if forcing RESTART when receive cause 44 on this span.
Definition at line 499 of file sig_pri.h.
◆ idlecontext
What context to use for idle
Definition at line 551 of file sig_pri.h.
◆ idledial
◆ idleext
◆ inband_on_proceeding
unsigned int inband_on_proceeding |
TRUE if a PROCEEDING message needs to unsquelch the received audio.
Definition at line 493 of file sig_pri.h.
◆ inband_on_setup_ack
unsigned int inband_on_setup_ack |
TRUE if a SETUP ACK message needs to open the audio path.
Definition at line 491 of file sig_pri.h.
◆ initial_user_tag
Initial user tag for party id's sent from this device driver.
- Note
- String set by config file.
Definition at line 548 of file sig_pri.h.
◆ internationalprefix
char internationalprefix[10] |
country access code ('00' for european dialplans)
Definition at line 507 of file sig_pri.h.
◆ lastreset
time when unused channels were last reset
Definition at line 617 of file sig_pri.h.
◆ layer1_ignored
unsigned int layer1_ignored |
TRUE if layer 1 alarm status is ignored
Definition at line 484 of file sig_pri.h.
◆ localdialplan
Local dialing plan
Definition at line 505 of file sig_pri.h.
◆ localprefix
area access code + area code ('0'+area code for european dialplans)
Definition at line 509 of file sig_pri.h.
◆ lock
◆ master
◆ minidle
Min # of "idling" calls to keep active
Definition at line 554 of file sig_pri.h.
Referenced by mkintf().
◆ minunused
◆ moh_signaling
◆ msn_list
Comma separated list of MSNs to handle. Empty if disabled.
Definition at line 549 of file sig_pri.h.
◆ nationalprefix
area access code ('0' for european dialplans)
Definition at line 508 of file sig_pri.h.
◆ new_chan_seq
◆ no_b_chan_end
List of private structures of the user of this module for no B channel interfaces. (hold and call waiting interfaces)
Definition at line 612 of file sig_pri.h.
◆ no_b_chan_iflist
List of private structures of the user of this module for no B channel interfaces. (hold and call waiting interfaces)
Definition at line 607 of file sig_pri.h.
Referenced by destroy_all_channels().
◆ no_d_channels
unsigned int no_d_channels |
TRUE if we have already whined about no D channels available.
Definition at line 598 of file sig_pri.h.
◆ nodetype
◆ nsf
Network-Specific Facilities
Definition at line 557 of file sig_pri.h.
◆ numchans
◆ overlapdial
In overlap dialing mode
Definition at line 448 of file sig_pri.h.
◆ pri
◆ pritimers
int pritimers[PRI_MAX_TIMERS] |
◆ privateprefix
for private dialplans
Definition at line 510 of file sig_pri.h.
◆ pvts
◆ qsigchannelmapping
QSIG channel mapping type
Definition at line 449 of file sig_pri.h.
◆ resetinterval
Interval (in seconds) for resetting unused channels
Definition at line 515 of file sig_pri.h.
◆ resetpos
current position during a reset (-1 if not started)
Definition at line 594 of file sig_pri.h.
◆ resetting
true if span is being reset/restarted
Definition at line 593 of file sig_pri.h.
◆ sig
ISDN signalling type (SIG_PRI, SIG_BRI, SIG_BRI_PTMP, etc...)
Definition at line 595 of file sig_pri.h.
◆ span
span number put into user output messages
Definition at line 592 of file sig_pri.h.
◆ switchtype
◆ transfer
TRUE if call transfer is enabled for the span.
- Note
- Support switch-side transfer (called 2BCT, RLT or other names)
Definition at line 478 of file sig_pri.h.
◆ trunkgroup
◆ unknownprefix
for unknown dialplans
Definition at line 511 of file sig_pri.h.
The documentation for this struct was generated from the following file: